Raptor E700 Booya 1 -4pc Quick Release Canopy Mount Kit
Quick Release Canopy mount features a custom locking push/pull pin design for the rear and a custom slip on /off mounting system for the front
made to fit your Raptor E700 helicopter.
-Quick Release pin is made from all stainless steel components
-Standoff is made from 6061-T6 aluminum
-Hardcoat Surface Treatment
-Dyed Black
-Standoff Length REAR 22.6mm/.89 in w/M3 thread
-Booya 1 front FRONT mounting system features aluminum, delrin and stainless steel components
Kit is designed for use with the stock Raptor E 700 Canopy
Use of any other canopy may affect the intended performance of this kit
Kit includes:
2-Quick Release Pins
2-Quick Release Standoffs
2-Booya 1 mounts w/3M VHB mounting tape
2-Stainless Steel mounting screws
2-Standoffs
2-Custom washers
4-Grommets
*NOTE: Use of this kit requires you to increase the rear canopy mounting holes on your canopy to 11/32 to install grommets.
$49.99 shipped CONUS via USPS 1st Class Mail with Delivery Confirmation
International Shipping will be added at Checkout
See Shipping FAQ for additional Information
Part # RB14QRCM
made to fit your Raptor E700 helicopter.
-Quick Release pin is made from all stainless steel components
-Standoff is made from 6061-T6 aluminum
-Hardcoat Surface Treatment
-Dyed Black
-Standoff Length REAR 22.6mm/.89 in w/M3 thread
-Booya 1 front FRONT mounting system features aluminum, delrin and stainless steel components
Kit is designed for use with the stock Raptor E 700 Canopy
Use of any other canopy may affect the intended performance of this kit
Kit includes:
2-Quick Release Pins
2-Quick Release Standoffs
2-Booya 1 mounts w/3M VHB mounting tape
2-Stainless Steel mounting screws
2-Standoffs
2-Custom washers
4-Grommets
*NOTE: Use of this kit requires you to increase the rear canopy mounting holes on your canopy to 11/32 to install grommets.
$49.99 shipped CONUS via USPS 1st Class Mail with Delivery Confirmation
International Shipping will be added at Checkout
See Shipping FAQ for additional Information
Part # RB14QRCM
Raptor G4 - E720

Quick Release Canopy mount features a custom locking push/pull pin design made to fit your Raptor G4 Nitro and E720 helicopter.
-Quick Release pin is made from all stainless steel components
-Standoff is made from 6061-T6 aluminum
-Hardcoat Surface Treatment
-Dyed Black
-Standoff Length .550 in/ 13.97mm w/M3 thread
Kit is designed for use with the stock Raptor G4 and E720 canopy
Use of any other canopy may affect the intended performance of this kit
Kit includes:
2-Quick Release Pins
2-Quick Release Standoffs
4-Grommets
*NOTE: Use of this kit requires you to increase the canopy mounting holes on your canopy
to 11/32 diameter to install the grommets.
$24.99 shipped CONUS via USPS 1st Class Mail with Delivery Confirmation
International Shipping will be added at Checkout
See Shipping FAQ for additional information
Part #RG4QRCM
Raptor E7 4pc Front/Rear Kit

Quick Release Canopy mount features a custom locking push/pull pin design
made to fit your Raptor E700 helicopter.
-Quick Release pin is made from all stainless steel components
-Standoff is made from 6061-T6 aluminum
-Hardcoat Surface Treatment
-Dyed Black
-Standoff Length FRONT 22.6mm/.89 in w/M3 thread
-Standoff length REAR 27.18mm/1.07in w/M3 thread
Kit is designed for use with the stock Raptor E 700 Canopy
Use of any other canopy may affect the intended performance of this kit
Kit includes:
4-Quick Release Pins
4-Quick Release Standoffs
4-Grommets
*NOTE: Use of this kit requires you to increase the canopy mounting holes on your canopy to 11/32 to install grommets.
$48.99 shipped CONUS via USPS 1st Class Mail with Delivery Confirmation
International Shipping will be added at Checkout
See Shipping FAQ for additional Information
Part # RE74QRCM
Raptor E7 2pc REAR

Quick Release Canopy mount features a custom locking push/pull pin design
made to fit your Raptor E700 helicopter.
-Quick Release pin is made from all stainless steel components
-Standoff is made from 6061-T6 aluminum
-Hardcoat Surface Treatment
-Dyed Black
-Standoff Length 27.18mm/1.07in w/M3 thread
Kit is designed for use with the stock Raptor E 700 Canopy
Use of any other canopy may affect the intended performance of this kit
Kit includes:
2-Quick Release Pins
2-Quick Release Standoffs
4-Grommets
*NOTE: Use of this kit requires you to increase the canopy mounting holes on your canopy to 11/32 to install grommets.
$24.99 shipped CONUS via USPS 1st Class Mail with Delivery Confirmation
International Shipping will be added at Checkout
See Shipping FAQ for additional Information
Part # RE7RQRCM
Quick Release Pin

1-Quick Release Pin
$10.99 shipped CONUS via USPS 1st Class
Mail w/Delivery Confirmation
International Shipping will be
added at Checkout
See Shipping FAQ for additional
information
Part #QRP
Grommets

4- Grommets
$4.99 per
kit shipped CONUS via USPS 1st Class Airmail
w/Delivery Confirmation
International
Shipping will be added at Checkout
See Shipping FAQ for additional
information
Part #RG